Automatic gas shut off valves are designed for earthquakes, accidents and other such events. Non-emergency shut offs will occur if the automatic gas shut off is not installed according to manufacturer’s specifications. For example, the impact of heavy vehicles can trigger a non-emergency shut off. We have successfully implemented hundreds of earthquake valve installations to the manufacturer’s specifications.
Some cities and counties have regulations that require the installation of automatic gas shutoff devices, which may include excess flow gas shutoff valves and/or earthquake gas shut off valve installation. Regulations may vary, but most regulations apply to new building construction, or significant alterations or additions to existing buildings. Check with your local city or county agency to see if regulations apply in your area.
Earthquake Valve Installation
If you need to install an excess flow gas shutoff valve or an earthquake gas shutoff valve, it must be done by State of California certified professionals. The State of California is required to approve all excess flow gas shutoff valves and earthquake actuated gas shutoff valves used in the state. A list of approved valves is available on the DSA Gas Shut-off Valves Certification Program webpage.
That’s why you need a licensed plumbing contractor who is familiar with the manufacturer’s specifications and instructions.
PG&E does not install or service seismic actuated or excess flow gas shutoff valves, or recommend specific contractors for customer applications and earthquake safety plumbing solutions.
Automatic Gas Shutoff
Gas Service Shutoff
Gas Service Shutoff Valves
Manually turning off the earthquake gas service shutoff valve is the most common method to stop the flow of gas serving a building, or part of a building, in case of an emergency. Gas service shutoff valves are installed by PG&E at all gas meter locations or outside locations if the meter is not accessible from the outside.
Excess flow gas shutoff valves and earthquake actuated gas shutoff valves must be installed on the buildings gas houseline piping (the gas pipe connecting your appliances to the gas meter) downstream of the utility point of delivery; i.e. after the PG&E gas shutoff valve, pressure regulator (if installed), meter(s), and the service tee. No attachments or connections of any kind are allowed on utility facilities prior to the point where the service tee connects to the gas houseline piping. Once installed, the valve must not obstruct the operation or serviceability of PG&E’s piping, gas service shutoff valve, gas meter or gas pressure regulating equipment.
In the event that a gas service shutoff valve or an automatic gas shutoff device is closed, there may be a considerable delay before PG&E can turn your service on, but do not turn it on yourself. PG&E or another qualified professional should perform a safety check, restore gas service, and relight any appliance pilots, even if the closure was not caused by an earthquake.
To learn more about the various shut off devices or for installation contact us. Or go to the PG&E website of your local gas supplier.
Albion Plumbing & Rooter is well-versed in all earthquake shut off valve installations as per regulations, with certified professionals who can install the right earthquake safety plumbing solutions for you.